Krell Industries DVD Standard User Manual download pdf (Page 29)

Krell DVD Standard 25

Krell recommends using balanced interconnect cables. Balanced

interconnect cables not only can minimize sonic loss but are also

less sensitive to induced noise, especially with installations using

long cables. Balanced connections have 6 dB more gain than single-

ended connections. When level matching is critical, keep this gain

value in mind.

This section provides information about connecting your DVD

Standard to other components in your system. The DVD Standard is

equipped with a variety of connection options, for ease of integration

into your home theater system.

Follow these steps to connect the DVD Standard to your system.

1. Make sure all power sources and components are off before

connecting inputs and outputs.

2. Neatly organize the wiring between the DVD Standard and all

system components. Separate AC wires from audio cables to

prevent hum or other unwanted noises from being introduced into

the system.

3. Connect the input of your video components to the appropriate

output of the DVD Standard. See Getting Started, on page 6, for

information on ensuring that your video monitor and settings are

compatible with the DVD Standard.

4. Connect the balanced or single-ended analog outputs.

5. Plug the AC power cord into the IEC connector (37) on the back

panel, then plug the AC power cord into the wall socket. The red

stand-by LED (3) on the front panel illuminates.

Connecting the DVD Standard

to Your System

USING BALANCED

CONNECTIONS

Connection

Steps

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 63 64

No comments

Krell Industries DVD Standard User Manual Page 29